- Key won’t turn or gets stuck
- Worn or damaged ignition cylinders
- Broken key extraction
- Repaired at your location
When your ignition won't cooperate
A healthy ignition turns smoothly every time. When it starts to stick, jam or feel loose, it's a sign that the key, the ignition cylinder or both are wearing out. Left alone, the problem usually gets worse until the day the key won't turn at all — often at the worst possible moment.
Our ignition repair service diagnoses the problem at your location and, whenever possible, repairs the existing ignition cylinder rather than replacing it.
Common ignition problems we fix
- Key won't turn in the ignition, or only turns after jiggling
- Key gets stuck and won't come out
- Steering wheel locked and the key won't release it
- Broken key snapped off inside the ignition
- Loose or wobbly ignition cylinder
- Ignition damaged after a break-in or theft attempt
Is it the key or the ignition?
Worn keys are a surprisingly common cause of ignition trouble. Over years of use, the cuts on a key become rounded and no longer line up the wafers inside the cylinder. Try your spare key: if it works smoothly, the problem is probably your main key, and a fresh replacement car key cut to factory specifications may solve it. If both keys struggle, the cylinder needs attention.
Quick checks before you call
- Turn the steering wheel gently left and right while turning the key — the steering lock may be holding the cylinder.
- Make sure an automatic transmission is fully in Park.
- Never force the key; a snapped key makes the repair harder.
Repair or replace?
Many ignition cylinders can be cleaned, re-wafered or rebuilt. If the cylinder is too badly damaged, we'll recommend an ignition replacement and explain the cost before starting. Call (437) 433-9684 for help in Kitchener, Waterloo, Cambridge, Guelph or Hamilton.
Ignition Repair near you
We provide ignition repair throughout these areas:
- Ignition Repair in Kitchener
- Ignition Repair in Waterloo
- Ignition Repair in Cambridge
- Ignition Repair in Guelph
- Ignition Repair in Hamilton
- Ignition Repair in Brantford
- Ignition Repair in Stratford
- Ignition Repair in Paris
- Ignition Repair in Woodstock
- Ignition Repair in Burlington
- Ignition Repair in Mississauga
- Ignition Repair in Fergus
- Ignition Repair in London
Ignition Repair FAQs
Why won’t my car key turn in the ignition?
The most common causes are a steering wheel lock under tension, a worn key, or worn wafers inside the ignition cylinder. Gently turning the steering wheel while turning the key often releases a steering lock.
Can a locksmith repair an ignition?
Yes. A mobile automotive locksmith can often repair or rebuild an ignition cylinder on site, or replace it if repair is not possible.
Can you remove a broken key from the ignition?
Yes. We use extraction tools to remove broken key pieces and can cut a new key at the same visit.